RipTide is the most complete bushing company out there.

The answer to this one is simple and that is replacing them when they no longer feel good.

They don’t give durometer numbers For their harnesses.

There are also plenty of other disciplines that use them as well. Yet, there are many more shapes and we’re going to go through all them here and let you know what each one does. Orangatang is a company that’s well known for their wheels.

Each shape offers different turn characteristics and can be mixed and matched to achieve unique ride styles. Altering the chemical makeup or formula makes the bushings harder, softer, or rebound differently. The kingpin nut can be used to make fine adjustments to the tightness of your trucks, but major adjustments should be made by changing the bushing's shape or durometer. Now with that out of the way let’s talk about esk8 bushings. If that’s not awesome customer service then I don’t know what is. Placing a harder barrel will provide more stability while the softer conical bushing still allows your board to turn and pivot. The reason they named them hardcore is they literally have a hardened core in the center of the bushing. This is a shape currently only sold by Riptide. Meepo V3 Long-Term Review | Best Board for Beginners?

One important thing to note is that durometers are not the same across different formulas within the same company.

The RKP sits a little higher than a TKP truck which makes it great for smooth turns and carves. Just like wheels, bushings are made of polyurethane and come in several shapes and hardnesses. When it comes to any type of skateboarding there are two types of truck, excluding gimmicks or prototypes. Regular skateboarders only need cup washers, flat washers will cause your trucks to be all over the place. Both trucks should behave the same so try to evenly tighten them to make them behave the same. Some prefer traditional, technical skating, while others are geared toward a more creative spin to every... Hey, thanks for dropping by!

Short: This term usually comes into play more with traditional Kingpin trucks. Not all bushings are suited for each type of skateboard though. We got the pics from this Reddit Post. But Brad told me he did those because people kept asking for them. No other company makes pivot cups that are the same quality or that precisely fit every truck. Once the bottom bushing is maxed compressed, the top bushing will take over. I personally haven’t ridden these bushings so I don’t have too much more to add on them. Some have more of a curved shape and others have a more straight or a slight angle.

They make quality wheels and they also make a set of bushings. This is great for cutting sharp lines in bowls and pools, while it will also be nice for a daily cruiser/commuter setup. Join today to take 15% Off Clothing and Accessories. You may need to wiggle your hanger side to side to help pull the top bushing out of the bushing seat and remove the hanger's pivot from the pivot cup. There are exceptions to this. These are suitable for light (as in weight) skateboarders and people who prefer loose trucks. Venom is the most famous longboard bushing brand. Join Waitlist.

Besides tightness and stiffness, they also provide lots of rebound, meaning they snap back to the center quickly.

It’s a great compound and I still use it on my rear trucks on my long-distance setup.

This allows the user to turn the kingpin up to 2 full rotations or 720 degrees. More deck clearance might also help you to prevent wheelbite. You can call, email, chat or IM during business hours seven days a week. Riptide is once again unmatched when it comes to pivot cups. Bushings come in different shapes each specifically designed for different styles.

These are rarely used though in the Skate World.

But, Riptide and Venom have many formulas within their companies. Cruising and carving require a bit of a softer bushing depending on your weight. If you’re seeing any cuts, tears, or air bubbles that could also be another sign it’s time to replace that bushing. Once again ask your truck maker or the company that you’re buying bushings from for which ones you need. This gives you the advantage of having both a large supportive shape and soft responsive urethane.

There are different size washers, but most bushing companies will give you the correct size washer with the bushings you buy. Stepped bushings are also referred to as stepped barrels because of the similar shape. They also make very good TKP bushings.

Squeaky sounds are usually a sign of dried out bushings that you can fix by putting soap shavings or candle wax inside the pivot cup. If you weigh over 140lbs go for durometer 93A. Between those three formulas combined there are over 25 different durometer options.

Riot is an amazing longboarding brand run by Madison Atwood. They are best used for the general skateboarder, where no unique or special performance needs are required (other than getting gnargnar). Regardless, this is here for reference if you happen to find Khiro. If you need something more stable just go with the classic barrel/cone bushing. I also have no regrets because Krank is by far my favorite bushing ever.

Tweet. Quick View ROOSTER Replacement Washers & …

When the bushing is at this point it has its maximum range of movement. A friend of mine who rides them says they seem to snap back in place faster than his last bushings.

An illustration of a magnifying glass. They inspect each bushing 2-4 times for air bubbles, color inconsistency, or other defects.

Soft bushings have a durometer below 90A or 70B.

Tall: As the name suggests these bushings are tall.
I pulled these prices off of the official websites for each company. It's been a long time coming but after a few years of testing out gear and trying new stuff, it's time to present the best skateboard wheels for every style.

When I do I’ll make sure to cite what advice he gave me. Do you need a strong rebound (meaning you want them to snap back to the center quickly) or perhaps you need lots of drive? Don’t forget about your weight, heavier skaters obviously need harder bushings to prevent wheelbite. On why these two are the best I’ll get into that further in the article but first let’s cover what exactly bushings are. Do you need stability because you like to go fast? In general, I do know that a lot of skate companies make their wheels and bushings in California.
Brand divide the hardness into 3 categories; soft, medium, and hard. Most bushings range from very soft 78a to very hard 98a. The goal of this tool is to create the easiest to use bushing durometer calculator for any bushing brand out there. No one matches Riptide in their number of formulas, shapes, and durometer options. Bushings have a board side and a roadside meaning one is placed on top and at the bottom.

For pricing, I think it’s important to compare apples to apples. Note that these bushings are only the cone shapes and do not include the other shapes that Venom makes for their RKP bushings. The website says, “Nipples are NOT recommended for every truck on the market, but they do work well with Paris, Tracker Fastracks and Randals (among others).” I have actually ridden orangutan soft nipples. The wide end should face upward and the narrow end downward. Cone-shaped bushings but the smaller surfaces are placed on top of each other. I noticed this when I picked up skateboarding again and gained some weight.

Venom bushing just releases couple charts based on style and weight.